This store requires javascript to be enabled for some features to work correctly.

FREE SHIPPING ON CONTINENTAL USA WEB ORDERS OVER $150

24V LED Strip Light Kit - IP54 - LED Lights with Remote

  • $309.99
Shipping calculated at checkout.
60RGBKIT

24V LED Strip Light Kit

LED Strip Kit - Silicone Coated - Indoor/Outdoor Use

This low voltage, color changing RGB LED light kit is super bright, ETL listed, can create up to 16 million color combinations, and comes backed with 3M red industrial strength tape for easy and effective mounting.



Description

Lumilum IP54 24V RGB LED tape light kit is part of our water-resistant, silicone-coated line of low voltage, high CRI led strip lights. The silicone cover provides protection from water, humidity, and dust. This flexible LED strip light is recommended by homeowners, architects, and lighting designers for the most professional, or critical home projects as these dimmable LED strip lights are built with SMD 5050 LED diodes with a CRI (Color Rendering Index) of >90 for ultra-crisp, no flicker, prismatic lighting.

Our energy-efficient LED strip lights are the best high-quality led light strips for home use or professional lighting design - i.e. soffit lighting, ceiling lighting, under-cabinet LED tape lighting or any area where low voltage lighting is required. These remote control led lights are available in multiple color options: intense bluewarm white color temperaturesRGB color changing LED strip light (roll only), and an all-in-one RGB LED Color Changing Lights with Remote Kit (16.4 ft roll + 24V transformer + RGB remote controller) to ensure total low voltage lighting control solutions for all needs.

For ultimate flexibility, IP54 dimmable LED RGB light strips are cuttable, should a further connection or the full 16.4ft spool length not be needed. The tape lights are cuttable at marked locations every 4 inches (5 LED chips), and for easy installation, our 24V LED lights are able to be daisy-chained (connected in series) up to 32.8ft or two full rolls, but a parallel connection is required to cover greater distances if the use of one single power driver is desired.

These color-changing light strips, as well as our controllers, work at 24V so they can also be used (without an external power source) in cars, trucks, RVs, and boats where a 24V power source is available and are 100% dimmable when used with a 24V RGB controller remote and 24V power supply.



24V RGB LED Light Kit Contents:

  • 1x 16.4 ft LED Strip Light Kit
  • 1x 44 Key Compact Radio Frequency Remote Control
  • 1x 96W Power Adapter (plugs directly into outlet) 


Key Features


  • 55 watt, 16.4ft RGB LED tape light kit
  • 300 high power, low energy LED SMD 5050 chips per LED strip roll
  • CRI (Color Rendering Index) of >90 (out of 100)
  • Color-coded wire at beginning and end of strip for easy wiring
  • Cuttable every 4 inches / 5 LED chips
  • UL listed / ETL listed
  • With the included IR remote control, you can control the brightness, color, fade in/out, and flash rate of the led strip lights rgb color changing kit, as well as the ability to program up to 6 of your favorite colors (or use the pre-programmed dynamic color-changing patterns)


Specifications


    MPN/SKU: LUM-60RGBKIT
    Safety Certifications: ETL Listed
    LED Strip Voltage: 24V DC
    LED Chip Type: SMD5050
    LED Spacing: 0.66in / 16.7mm
    LED Light Roll Length: 16.4ft / 5m
    LED Strip Height: 0.12in / 3mm
    LED Strip Width: 0.39in / 10mm
    Lumen Output/ft: (Red - 51nm) (Green - 127nm) (Blue - 39nm)
    LED Diodes: 18 LED diodes/ft
    IP Rating: IP54 (suitable indoor/outdoor but not submersible)
    Beam Angle: 120°
    Power Consumption: 3.05 Watts/ft
    Cutting Intervals: Cuttable every 4 inches / 6 LED chips at marked locations
    Working Temperature: -68°F to 176°F
    Color Temperature: (Red - 626nm) (Green - 525nm) (Blue - 470nm)

    Applications

    Due to the flexibility and color rendering power of this 24V LED Tape Light Kit, it is popularly used for short-length LED light design, stage lighting, and DIY lighting projects as well as for home and commercial applications such as:

    • retail lighting
    • architectural displays
    • dynamic bedroom lighting
    • concert and venue lighting
    • back-lit signs
    • accent lighting
    • bar & liquor displays
    • hotel lighting

    Installation


    IP54 RGB LED Tape Light + 24V Power Supplies (included in kit) RGB Controller (included in 16.4ft LED Strip Light Kit)


    + In case you need to cover distances larger than 16.4 ft, you will need:

    Additional LED RGB Tape LightLED light power supplies + (optional) RGB Controller (when needing LED lights with remote we recommend using our Touch Series Controllers


     

    Reviews