24V LED Strip Lights
IP54 Rated - Low Voltage - Indoor/Outdoor
This single color, low voltage LED tape light is super bright, ETL listed, and comes backed with 3M red industrial strength tape for easy and effective mounting.
Lumilum IP54 LED tape lights are part of our water-resistant, silicone-coated line of low voltage led lights. The silicone cover provides protection from water, humidity, and dust. This LED strip light is recommended by homeowners, architects, and lighting designers for the most upscale, or critical home projects as these dimmable LED strip lights are built with SMD 5050 LED diodes with a CRI (Color Rendering Index) of >90.
Our energy-efficient, LED strip lights are the best led strip light choice for professional lighting design or indoor home use such as soffit lighting, ceiling lighting, undercabinet LED tape lighting, or any area where low voltage lighting is required.
These 24V LED Strip lights are 100% dimmable when used with a Lumilum Dimmable LED Electronic or LED Magnetic Transformer and the low voltage transformers work with most wall-mounted dimmers that are readily available at your local hardware store.
For ultimate flexibility, these IP54 rated, 24V LED lights are cuttable in case the full 16.4ft spool length is not needed. The tape lights are easy to install, cuttable at marked locations every 4 inches (5 LED chips), contain color coded wiring at both the beginning and end of strip, and our low voltage commercial led strip lights are able to be daisy chained (connected in series) up to 32.8ft or two full rolls. A parallel connection is required to cover greater distances if the use of one single power driver is desired.
- 16.4ft total reel length
- Fully dimmable
- 55 watts per reel
- IP54 rated for indoor and outdoor use (not submersible)
- Multiple color tone options: 2700K Ultra Warm White, 3000K Warm White, 4000K Natural White, 5500K Cool White, and Blue
- UV-protected silicone coated to guard against humidity, dust, and yellowing over time
Safety Certifications: ETL Listed
LED Strip Voltage: 24V DC
LED Chip Type: SMD5050
LED Spacing: 0.66in / 16.7mm
LED Light Roll Length: 16.4ft / 5m
LED Strip Height: 0.08in / 2.03mm
LED Strip Width: 0.39in / 9.9mm
Lumen Output: 360 lumens/ft per white tones (Blue - 465nm)
LED Diodes: 18 LED diodes/ft
IP Rating: IP54 (suitable indoor/outdoor but not submersible)
Beam Angle: 120°
Power Consumption: 3.35 Watts/ft
Color Rendering Index: >90 (out of 100)
Cutting Intervals: Cuttable every 4 inches / 5 LED chips at marked locations
Working Temperature: -68°F to 176°F
Color Options: 2700K, 3000K, 4000K, 5500K, and Blue
Full Specifications: IP54 24V Tape Lights Spec Sheet
Due to the flexibility and color rendering power of these 24V LED strip lights, they are popularly used for LED cove lighting, soffit lighting, kitchen under cabinet lighting, DIY lighting projects in home and commercial areas, and short-length lighting installs.
Other popular applications include:
- retail lighting
- architectural lighting
- stairways and railings
- bedroom lighting
- library lighting
- back-lit signs
- accent lighting
- bar & liquor displays
- hotel lighting
- car, truck, RV, and boat lighting