24V LED Tape Light - IP54 Series Kit - RGB LED Lights with RemoteLumilum
24V IP54 RGB LED Tape Light Kit
Remote Control LED Lights - Silicone Coated - Indoor/Outdoor
RGB LED Light Strip Highlights:
- 55 watt, 16.4ft RGB LED tape light kit
- 300 high power, low energy LED SMD 5050 chips per LED strip roll
- CRI (Color Rendering Index) of >90 (out of 100)
- Color-coded wire at beginning and end of strip for easy wiring
- Cuttable every 4 inches / 5 LED chips
- UL listed / ETL listed
- With the included IR remote control, you can control the brightness, color, fade in/out, and flash rate of the led strip lights rgb color changing kit, as well as the ability to program up to 6 of your favorite colors (or use the pre-programmed dynamic color-changing patterns)
24V RGB Flexible LED Strip Kit Installation Requirements:
24V RGB LED Light Kit Contents:
- 1x 16.4 ft LED Strip Light Kit
- 1x 44 Key Compact Radio Frequency Remote Control
- 1x 96W Power Adapter (plugs directly into outlet)
24V RGB LED Strip Lighting Uses:
Cove Lighting | LED Under Cabinet Lighting | Stairs | Restaurants | Back-lit Signs | Bars & Liquor Displays | Window Trims | Furniture Illumination | LED Kitchen Lighting | Home Accent Lighting | Architectural Lighting | Hotels | LED Lights for Bedrooms | Stage Lighting | LED Light Design
Lumilum IP54 24V RGB LED tape light kit is part of our water-resistant, silicone-coated line of low voltage, high CRI led strip lights. The silicone cover provides protection from water, humidity, and dust. This flexible LED strip light is recommended by homeowners, architects, and lighting designers for the most professional, or critical home projects as these dimmable LED strip lights are built with SMD 5050 LED diodes with a CRI (Color Rendering Index) of >90 for ultra-crisp, no flicker, prismatic lighting.
Our energy-efficient LED strip lights are the best high-quality led light strips for home use or professional lighting design - i.e. soffit lighting, ceiling lighting, under-cabinet LED tape lighting or any area where low voltage lighting is required. These remote control led lights are available in multiple color options: intense blue, warm white color temperatures, RGB color changing LED strip light (roll only), and an all-in-one RGB LED Color Changing Lights with Remote Kit (16.4 ft roll + 24V transformer + RGB remote controller) to ensure total low voltage lighting control solutions for all needs.
For ultimate flexibility, IP54 dimmable LED RGB light strips are cuttable, should a further connection or the full 16.4ft spool length not be needed. The tape lights are cuttable at marked locations every 4 inches (5 LED chips), and for easy installation, our 24V LED lights are able to be daisy-chained (connected in series) up to 32.8ft or two full rolls, but a parallel connection is required to cover greater distances if the use of one single power driver is desired.
These color-changing light strips, as well as our controllers, work at 24V so they can also be used (without an external power source) in cars, trucks, RVs, and boats where a 24V power source is available and are 100% dimmable when used with a 24V RGB controller remote and 24V power supply.
+ In case you need to cover distances larger than 16.4 ft, you will need: