24V LED Light Strip - IP54 Series
Low Voltage - Silicone Coated - Indoor/Outdoor
This single color, low voltage LED tape light is super bright, ETL listed, and comes backed with 3M red industrial strength tape for easy and effective mounting.
 |
 |
 |
24 Volt Strip Light Highlights: :
- 55 watt, 16.4ft single color light reel
- 300 high power/low energy LED SMD 5050 chips per led strip roll
- CRI (Color Rendering Index) of >90 (out of 100)
- Cuttable every 4 inches / 5 LED chips
- UL ETL listed mark for safety
24V LED Strip Lighting Installation Requirements:
IP54 LED Tape Light + 24V Power Supplies (sold separately)
24V LED Light Roll Contents:
- 1x 16.4 ft spool of Lumilum IP54 24V LED Strip
24V LED Tape Lighting Uses:
Cove Lighting | Under Cabinet Lighting | Stairs | Restaurants | Back-lit Signs | Kitchen | Bars & Liquor Displays | Window Trims | Furniture Illumination | Home Accent Lighting | Architectural Lighting | Hotels | Bedroom LED Lighting | Stage Lighting
Lumilum IP54 LED tape lights are part of our water resistant, silicone coated line of low voltage led lights. The silicone cover provides protection from water, humidity, and dust. This LED strip light is recommended by homeowners, architects, and lighting designers for the most upscale, or critical home projects as these dimmable LED strip lights are built with SMD 5050 LED diodes with a CRI (Color Rendering Index) of >90.
Our energy-efficient, LED strip lights are the best led strip light choice for professional lighting design or indoor home use such as soffit lighting, ceiling lighting, undercabinet LED tape lighting, or any area where low voltage lighting is required. This series is available in intense blue, white color temperatures, RGB color changing LED strip (roll only), and an all-in-one RGB LED strip kit (roll + power supply + RGB remote controller bundle) to ensure solutions for all needs.
These 24V LED Strip lights are 100% dimmable when used with a Lumilum Dimmable LED Electronic or LED Magnetic Transformer and the low voltage transformers work with most wall-mounted dimmers that are readily available at your local hardware store.
For ultimate flexibility, IP54 low voltage dimmable led strip lights are cuttable, should the full 16.4ft spool length not be needed. The tape lights are easy to install, cuttable at marked locations every 4 inches (5 LED chips), contain color coded wiring at both the beginning and end of strip, and our low voltage commercial led strip lights are able to be daisy chained (connected in series) up to 32.8ft or two full rolls. A parallel connection is required to cover greater distances if the use of one single power driver is desired.
These color changing light strips, as well as our controllers, work at 24V so they can also be used (without an external power source) in cars, trucks, RVs, and boats where a 24V power source is available and are 100% dimmable when used with a 24V RGB controller remote and 24V power supply.