120V RGB LED Strip Light - DMX Control - Color Changing - B34XT Series
120V RGB LED Strip Light - DMX Control - Color Changing - B34XT Series 120V RGB LED Strip Light - B34XT Series 120V RGB LED Strip Light - B34XT Series 120V RGB LED Strip Light - B34XT Series 120V RGB LED Strip Light - B34XT Series 120V RGB LED Strip Light - DMX Control - Color Changing - B34XT Series 120V RGB LED Strip Light - B34XT Series 120V RGB LED Strip Light - DMX Control - Color Changing - B34XT Series 120V RGB LED Strip Light - DMX Control - Color Changing - B34XT Series
Chevron down Icon
$1,699.99

120V RGB Color Changing LED Strip Light - DMX Controllable


             

120V Line Voltage - RGB Color Changing - LED Strip Light - Works with DMX Control Panels (3-pin DMX Connector) - Up to 164 ft of strip light per DMX Controller/Decoder, Unlimited Decoders - No Driver Required - No Signal Amplifiers Required - No Voltage Drop

Super Bright Colors - 16 million Color Combinations Possible!

This easy to install commercial-grade High Voltage -120V Flexible LED RGB Strip Light is DMX Controllable and can be used over long distances without the need for additional drivers of RGB signal amplifiers. DMX Control results in precise color control and flexibility when setting up different Color Zones.

The DMX LED Strip produces Bright Colors that result in a vivid modern-looking light that will bring life to your most demanding project. The Strip is available in 25 ft., 50 ft. and 164 ft. and requires a Lumilum DMX Controller/Decoder to provide DMX Color Control as well as 120V DC Current to the strip. One controller is required for each run of up to 164ft.

Ships from the USA. 

Lumilum DMX LED Control/Decoder (LUM-B34XT-DMX) can be used with Lumilum Handheld Remotes Control (LUM-B34XT-RF2 & LUM-B34XT-HRT) but are also compatible with DMX Control Panels commonly available.

See Buying Guide at bottom of the page.

With features such as: SMD5050 LED chips, protective/water-resistant sleeve and optional mounting brackets, and channels for quick and effective mounting, these DMX LED strips are the best alternative when a long-distance of strip light is required, such as in a large area cove light or building exterior. Simply place the 120V RGB Color Changing LED lighting strip in your chosen location, connect the DMX Controller, connect the RF to DMX Module or DMX Control Panel This 120V LED Strip Light can be cut every 12 inches at marked locations.  

DMX LED Strip Highlights:

  • 3,300 Super-bright SMD5050 LED Chips per Roll - 20 LED Chips per Foot.
  • UV Protective Coating. Prevents damage to LED Chip and ensures that the cover remains transparent and does not become opaque over time.
  • Internal wires in strip contain copper, improving product performance and lifespan.
  • These RGB DMX Controllable LED Strip Lights can be remotely controlled using Lumilum Accessories or other compatible DMX decoders
Included with DMX LED Tape:
  • 164 ft., 50 ft. or  25 ft. of Lumilum 120V RGB LED Strip Light
  • Plug & Play Connector to Lumilum DMX Controller (Decoder)
  • 1 End-Cap attached to end of the run
Many Uses for DMX LED Strip Lights: 
  • Cove Lighting
  • Landscape Lighting
  • Stairs
  • Building Outline
  • Back-lit Signs
  • Furniture Lighting
  • Bars & Liquor Displays
  • Window Trims 

BUYING GUIDE

 

    Products Required for 120V RGB Strip Light Using Lumilum Handheld Remote System:

    SEE THESE PRODUCTS ON ONE PAGE

    1. 120V RGB LED Strip Light (LUM-B34XTS-165 / 050 / 025) 
    2. RGB DMX Decoder/Controller (LUM-B34XTS-DMX) - Note: One for each 164ft of strip.
    3. RF to DMX Module (LUM-B34XTS-RF2)
    4. Handheld Remote (LUM-B34XTS-HRT)
    5. In case of multiple DMX Controllers and or RF to DMX Modules located >2 ft apart you may also need:

      Products Required for 120V RGB Strip Light Using a (Generic) DMX Control Panel:

      SEE THESE PRODUCTS ON ONE PAGE

      1. 120V RGB LED Strip Light (LUM-B34XTS-165 / 050 / 025) 
      2. DMX Controller/Decoder (LUM-B34XTS-DMX)
      3. 3-pin DMX to Mini-XLR Converter Cable (LUM-B34XTS-XLR)
      4. In case of multiple DMX Controllers located >2 ft apart you may also need:

           

           

           

          120V RGB LED Strip Light, High Voltage, DMX Control, LED Strip Lights -no driver required, driver-less, Line Voltage RGB Tape.

          120V RGB LED Strip Light, High Voltage, DMX Control, LED Strip Lights -no driver required, driver-less, Line Voltage RGB Tape.