24V LED Tape Light (Silicone Cover) - IP54 Series - RGB Color ChangingLumilum
24V Color Changing LED Tape Light
Low Voltage RGB - Silicone Coated - Indoor/Outdoor
24 Volt Strip Light Highlights:
- 55 watt, 16.4ft single color light reel
- 300 high power/low energy LED SMD 5050 chips per led strip roll
- CRI (Color Rendering Index) of >90 (out of 100)
- Cuttable every 4 inches / 5 LED chips
- UL ETL listed
24V RGB LED Strip Lighting Installation Requirements:
- 1x 16.4 ft spool of Lumilum IP54 24V RGB LED Strip
24V RGB LED Strip Lighting Uses:
Cove Lighting | LED Under Cabinet Lighting | Stairs | Restaurants | Back-lit Signs | Bars & Liquor Displays | Window Trims | Furniture Illumination | LED Kitchen Lighting | Home Accent Lighting | Architectural Lighting | Hotels | LED Lights for Bedrooms | Stage Lighting | LED Light Design
Lumilum IP54 RGB 24V LED tape lights are part of our water resistant, silicone coated line of low voltage led lights. The silicone cover provides protection from water, humidity, and dust. This flexible LED strip light is recommended by homeowners, architects, and lighting designers for the most professional, or critical home projects as these dimmable LED strip lights are built with SMD 5050 LED diodes with a CRI (Color Rendering Index) of >90 for ultra-crisp, no flicker, mood lighting.
Our energy-efficient, LED strip lights are the best led strip light choice for professional lighting design or indoor home use such as soffit lighting, ceiling lighting, under cabinet LED tape lighting, or any area where low voltage lighting is required. This series is available in white color temperatures, intense blue, RGB color changing LED strip light (roll only), and an all-in-one RGB LED strip kit (roll + 24V transformer + RGB remote controller) to ensure total low voltage lighting control solutions for all needs.
For ultimate flexibility, IP54 dimmable LED RGB light strips are cuttable, should further connection or the full 16.4ft spool length not be needed . The tape lights are easy to install, cuttable at marked locations every 4 inches (5 LED chips), contain color coded wiring at both the beginning and end of strip for easy wiring, and our low voltage commercial led strip lights are able to be daisy chained (connected in series) up to 32.8ft or two full rolls. A parallel connection is required to cover greater distances if the use of one single power driver is desired.
These color-changing light strips, as well as our controllers, work at 24V so they can also be used (without an external power source) in cars, trucks, RVs, and boats where a 24V power source is available and are 100% dimmable when used with a 24V RGB controller remote and 24V power supply.