Free Shipping on Orders Above $75 (US Only)
☎ (855) 586-4586

How to Install

1. CONNECTION OF SEVERAL STRIPS TOGETHER (Parallel run)

Single Color LED Strip Light Installation Diagram 

 

2. CONNECTION OF LED CONTROLLER  Used for dimming (optional) or color  changing in RGB lights 

Single Color LED Strip Light Installation Diagram II 

 

3. CONNECTION OF LONG DISTANCE OF LED STRIPS WHEN CONTROLLER IS REQUIRED  Additional power source(s) and controller amplifier(s) required

Single Color LED Strip Light Installation Diagram III 

 

4. INSTALLATION OF LED STRIP LIGHTS TO COVER A LARGE AREA

Single Color LED Strip Light Installation Diagram IV 

 

How to Cut
Single Color LED Strip Light Long Distance Installation Diagram

 

How to connect several Lumilum Strip Lights together to cover a large distance (>16.4" - 5 meters) 

Lumilum Strip Lights have a 72 Watt output and require a power source of at least 75W. In this case each Lumilum Strip Light roll of 16.4" (5 meters) will require a separate power source of at least 75 Watts. You can use our power adapter (96 Watts) which will give you a nice safety margin or you can use one of our commercial grade power drivers of 75 Watts or 100 Watts. We also sell a commercial grade power driver of 150 Watts and more if you require to connect two sets of Lumilum Strip Lights to one power source. Please follow the diagram for correct installation.

Single Color LED Strip Light Installation Diagram V